« Back to Oak Cladding

External Oak Cladding

Natural element protection - LBC's range of Fresh Sawn Cladding is the ultimate when combining the splendour of oak with value. Fresh sawn cladding is cut straight from the log to the dimension required. The timber will shrink once fitted and this must be allowed for with sufficient coverage by overlapping the boards, as in the designs below, and also accommodated in the fixing method. Supplied fine sawn and unfinished, this fresh sawn cladding will not readily accept finishes until the surface has dried.

  • Lengths - up to 5000mm
  • Widths - up to 200mm
  • Thickness - 6mm-22mm
  • Moisture - 40-70%
  • Grades - QPA, QP1 and QP2

Below are the designs of our most common types.

Waney Edge

Feather Edge

Waney Edge Feather Edge

Air Dried Oak Cladding


LBC's Air Dried Oak Cladding is sold to suit a variety of projects. Due to its green credentials, timber cladding excels against man made alternatives. Oak's warmth, vitality and natural durability have assigned it as a premier cladding material with potential to withstand the seasonal cycle with minimum maintenance. If surface coating is the preferred choice, there will be some on going maintenance to preserve the coating. As per coating manufacturer’s guidance.

  • Lengths - up to 6000mm
  • Widths - up to 200mm
  • Thickness - 6mm-22mm
  • Moisture - 40-70%
  • Grades - QP1

Profiles for Air Dried and Internal Cladding

Tongue &
Groove

Tongue &
Groove with V

Shiplap

Feather Edge

Tongue and groove Tongue and groove with V Shiplap Feather Edge

European Oak Shingles


Recommended to be cut from quarter sawn.